You got your custom cold plunge… Now What?

  • Thank you so much for upgrading to one of my cold plunge tubs! This is the start of an incredible journey where you’ll build resilience, find motivation, and connect with yourself through cold therapy. The exciting part is setting it up, but the real growth comes on those cold mornings when you hesitate—and then take the plunge anyway. Embrace the discomfort; it’s where the magic happens. Your trust means the world to me, and I can’t thank you enough for supporting me and my journey. I’m here whenever you need guidance or help along the way! - Kolby Kero

  • Your cold plunge tub is labeled as a DIY kit to provide you with the freedom and flexibility to customize and assemble your setup to fit your space and needs. To ensure safe and proper use, please carefully follow the instructions in this manual.

    • Responsibility: By assembling and using this tub, you acknowledge that you are fully responsible for its installation, maintenance, and proper operation.

    • Liability: Our company is not liable for any damage, injury, or malfunction caused by improper setup, use, or maintenance of this product.

    • Electrical Safety: Always use a GFCI-protected, outdoor-rated extension cord and ensure that all electrical components are kept dry and away from water.

    • Weight Support: Place the tub on a stable, level surface that can support the weight of the tub when filled with water (up to 1,200 lbs).

    • Health Considerations: Consult a medical professional before starting cold therapy, especially if you have preexisting health conditions.

    • Children and Pets: Keep children and pets away from the tub unless supervised. Cold water can be dangerous if mishandled.

    By using this product, you agree to take all necessary precautions and follow the instructions provided. Your safety and satisfaction are our top priorities!

  • Your cold plunge tub kit comes with everything you need to assemble and enjoy your tub at home. Below is a list of the components included in your package:

    1. Insulated Tank – Designed to retain cold temperatures and handle consistent immersion.

    2. Chiller Unit – High-quality third-party chiller to keep water as cold as 37°F.

    3. Pump – Ensures proper water flow and circulation.

    4. Ozone Generator – Keeps water clean and sanitized.

    5. Filtration System – Removes debris and maintains water clarity.

    6. Draining Pump and Hose – A small pump and hose included for easy water drainage.

    7. Accessories:

      • Sand Timer – Perfect for tracking your immersion time.

      • Extra Filter – For long-term maintenance.

      • Filter Wrench – Simplifies the process of changing your filter.

      • Bluetooth Water Thermometer – Monitor your water temperature with ease.

  • Follow these steps to assemble and set up your DIY cold plunge tub:

    Step 1: Prepare the Site

    1. Choose the Right Location:

      • Place the insulated tank on a flat, stable surface that can support up to 1,200 lbs when filled with water.

      • Ensure the tub is within reach of your nearest outdoor GFCI outlet so the GFCI-protected outdoor-rated extension cord can easily reach without tension.

      • Use pavers to create a stable base:

        • Position pavers directly under the section of the tank that holds water to support its weight.

        • Place pavers on all four corners to ensure overall stability.

        • Leave a small gap between pavers to route the extension cord under the tank.

      (Picture: Diagram showing paver placement under the tank and the gap for routing the extension cord.)

    Step 2: Connect the Power Components

    1. Set Up the GFCI-Protected Three-Headed Extension Cord:

      • Plug the Bluetooth remote into the first of the three outlets on the GFCI cord. The remote allows you to control two components remotely.

      • Connect to the Bluetooth remote:

        • Plug the chiller and pump into the two outlets on the Bluetooth remote.

        • This setup lets you turn the chiller and pump off or on from inside your house or from a distance.

      (Picture: Close-up of the GFCI cord and Bluetooth remote showing the connected chiller and pump.)

    2. Connect the Timer and Ozone Generator:

      • Use the second outlet on the GFCI cord for the 24-hour timer provided in your kit.

      • Plug the ozone generator into the timer. Set the timer to run the ozone generator for 2 hours a day (refer to the timer’s instructions to configure this).

      (Picture: Timer connected to the GFCI cord and ozone generator plugged into the timer.)

    Step 3: Fill the Tank

    1. Use a Garden Hose to Fill:

      • Fill the tank with water up to the marked line (you’ll provide a picture for this). Avoid overfilling to allow space for displacement during use.

      (Picture: Garden hose filling the tank and the marked fill line on the tank.)

    2. Connect the Extension Cord to the Wall Outlet:

      • Once the tank is filled to the proper level, plug the GFCI extension cord into your outdoor wall outlet.

      (Picture: GFCI cord plugged into the wall outlet.)

    Step 4: Test the System

    1. Power On the Chiller:

      • Turn on the chiller using its power switch. Ensure the water begins circulating through the system.

      (Picture: Close-up of the chiller switch in the "ON" position.)

    2. Check Water Flow:

      • Confirm that water is flowing properly between the tank and the chiller. Inspect the plumbing to ensure there are no leaks or blockages.

      (Picture: Visual of water flowing into and out of the tank through the system.)

    Step 5: Final Setup Check

    • Ensure that the chiller, pump, and ozone generator are operating correctly.

    • Verify that the Bluetooth remote can turn the pump and chiller off and on as needed.

    • Double-check the timer is configured to run the ozone generator for 2 hours daily.